Cisco Client Layer Interface Port Module Channel 37 Medium Range - transceiver

Model: CH37/M/P/SC/15200-RF

Cisco Client Layer Interface Port Module Channel 37 Medium Range - Transceiver - fiber optic - SC - plug-in module - OC-48 - 1547.72 nm - refurbished

The Client Layer Interface Port (CLIP) module controls the electro-optical and high-speed electronic circuits used for extraction and addition of a single wavelength signal in dense wave division multiplexing (DWDM) networks. The CLIP module is controlled through an amplitude-modulated signal superimposed on the traffic signal (Qeyton Proprietary Protocol QPP) and/or a Controller Area Network (CAN) electrical interface. The CLIP module translates a designated incoming client-layer signal to a DWDM-layer signal with a designated wavelength and amplitude. Additionally, the CLIP module translates a designated DWDM-layer signal and provides an outgoing client-layer signal. This Client Layer Interface Port module incorporates both clocked (3R) and unclocked (2R) data regeneration. You can set the mode of operation (2R or 3R) using the management interfaces.

Cabling TypeFiber optic
Data Link ProtocolDWDM
Device TypeTransceiver
Dimensions (WxDxH)1 in x 10.4 in x 10.4 in
Enclosure TypePlug-in module
FeaturesManageable
Optical Wave Length1547.72 nm
Product DescriptionCisco Client Layer Interface Port Module Channel 37 Medium Range - transceiver
Weight1.8 lbs

Have Questions? Call us now!

847-468-8900